Cross Country® 300 (Kubota®)

Features

• It's All About the Arc – Out on the pipeline spread, your job depends on whether each and every weld passes inspection. The Cross Country 300 stick arc was tuned by pipeline welders for pipeline welders. That means puddle performance is excellent for root, fill, and cap passes and designed for cellulosic or low hydrogen stick electrodes.
• The Size is Right – On remote job sites, you have to carry everything with you. This puts space on your rig at a premium. The Cross Country 300 is the most compact engine-driven pipe welder in its class and easily fits on most trucks. That means you get a small footprint, short height for great visibility through the truck’s rear window, and lower weight to go easier on your truck’s suspension. The powder-coated steel enclosure and polished stainless steel exhaust stack will look great on your rig and will stand up to years of cross country travel. The new heavy-duty stainless steel case and rugged wired or wireless remotes add to the durability and utility of these welders.
• Easy To Use – It’s easy to get started with the Cross Country 300. Dual continuous controls designed for pipeline welding help you tune the arc for the pipe, pass, position, conditions and more. Fewer controls improve simplicity and reliability. Service access for routine maintenance is easy, even on the truck, with sliding engine access doors on each side of the machine. Battery jumper studs are also conveniently located. Digital meters and dashboard gauges monitor key functions.
• Flexible – When your project calls for wire or TIG welding, you’ll be ready. The Cross Country 300 supports DC stick, wire and TIG processes and easily connects to Lincoln Electric wire feeders. The powerful generator produces plenty of power for grinders, pumps and travel trailers – up to 11kW continuous three phase power. An engine block heater, standard equipment on the Cross Country 300, enables operation in cold weather environments.

What's Included?

• (1) Cross Country® 300 (Kubota®)

Specifications

• Country of Origin: United States
• Warranty Length: 3 Years Parts and Labor - Engine warranted separately by engine manufacturer
• EPA Certified: Yes
• Welding Technology: Inverter/Chopper
• Input Voltage Type: Engine
• Output Polarity: DC
• Output Mode: CC; CV; CC/CV
• Max Output: 300-399
• Input Icon: D
• Output Icon: DC; CC/CV
• Engine Brand Model: Kubota®
• Engine Type: Naturally Aspirated
• Fuel Type: Diesel
• Height: 31.9 in
• Product Height (mm): 810
• Width: 25.3 in
• Product Width (mm): 643
• Length: 56.0 in
• Product Length (mm): 1422
• Weight: 1034 lb
• Product Weight (kg): 469
• Machines Processes: Stick (SMAW); Gouging (CAC-A); TIG (GTAW); MIG (GMAW); Flux-Cored Self-Shielded (FCAW-S); Flux-Cored Gas-Shielded (FCAW-G)
• Ingress Protection Rating: IP23
• IEC Rating: 300A / 32V / 100% @ 104°F (40°C)
• Max Rating: 350A / 28V / 100% @ 104°F (40°C)
• Open Circuit Voltage: 80 Peak OCV @ 1800 RPM
• Rated Gouging Carbon Diameter: 1/4 in (6.5 mm)
• IEC Amperage Class: 300
• Temperature Rating at Rated Output (deg C): 40
• Arclink Connector: No
• Tap or Continuous Control: Continuous
• Work Clamp Included: No
• Single Phase Auxiliary Output: 10,000 Watts Continuous, 120/240V
• Three Phase Auxiliary Output: 11,000 Watts Continuous, 240V
• Auxiliary Output Frequency: 60 Hz
• Receptacle Types: NEMA 5-20R; NEMA 14-50R; NEMA 15-50R
• Engine Brand & Model: Kubota® V1505
• Engine Description: 4 Cylinder Naturally Aspirated Water Cooled Diesel Engine
• Engine Horsepower: 22.0 hp (16.4 kW)
• Engine Block Size & Displacement: 91.4 cu. in (1.5 L), Bore x Stroke - 3.07 in x 3.09 in (78 mm x 78 mm)
• Emissions Rating: US EPA Tier 4 Final
• High Idle Operating Speed @ Rated Output: 1800
• Low Idle Operating Speed: 1350
• Fuel Tank Size (gal): 11.6 US gal.
• Fuel Tank Size (L): 44 L
• Oil Capacity (qts.): 6.4 qts.
• Oil Capacity (L): 6.0 L
• Coolant Capacity (gal): 1.2 US gal.
• Coolant Capacity (L): 4.5 L
• Auxiliary Output Type (Phase): 1 & 3
• Auxiliary Output Voltage: 120; 240
• Multifunctional Equipment: Welder; Generator
• Welding Controls: Chopper
• Remote Control Options: Wired
• User Interface Type: Continuous Knob
• Output Meters: Digital
• # of Control Knobs: Dual Knob
• Weld Modes: Touch Start TIG; CC-Stick; CV-Wire
• VRD: Option
• Engine Cylinders: 4
• Engine Controller: Mechnical
• Engine Cooling: Water
• Engine Starting: Manual Glow Plugs
• Engine Protections: High Temp Shutdown
• Spark Arrestor: Optional
• Fuel Consumption (High Idle): 0.40 gal/hr (1.52 L/hr)
• Fuel Consumption (Low Idle): 0.29 gal/hr (1.10 L/hr)
• Fuel Consumption (IEC Rating): 1.17 gal/hr (4.41 L/hr)
• Case Type: Painted
• Jumper Terminals: Yes

Downloads