ESAB WELD 70S-6 Solid Welding Wire .035 Dia - Spool 33#
from $146.99
$115.83
ESAB Weld 70S-6 is a copper-coated AWS ER70S-6 solid wire, suited for general purpose, manual and semiautomatic applications in most industries. It is manufactured under ESAB’s Quality Control programs and meets AWS standards.
Deposition Data
Current
Deposition Type
Diameter
Electrode Unit
Optimal Amps
Voltage
Wire Feed Speed
180-230 A
-
Spray Transfer
0.9 mm (.035 in.)
206 m/kg (3670 in./lb)
200 A
25-27 V
1016-1397 cm/min (400-550 in./min)
90-160 A
-
Short Arc Transfer
0.9 mm (.035 in.)
206 m/kg (3670 in./lb)
130 A
15-19 V
457-762 cm/min (180-300 in./min)
130-200 A
-
Short Arc Transfer
1.2 mm (.045 in.)
124 m/kg (2220 in./lb)
160 A
17-19 V
318-508 cm/min (125-200 in./min)
260-340 A
-
Spray Transfer
1.2 mm (.045 in.)
124 m/kg (2220 in./lb)
300 A
25-30 V
762-1270 cm/min (300-500 in./min)
Classifications
Wire Electrode
SFA/AWS A5.18 : ER70S-6
Weld Metal
EN ISO 14341-A : G 38 2 C1 Z 3Si1
Wire Electrode
JIS : YGW 12
Approvals
Approvals
ABS 3YSA (M21 & C1) CWB CSA W48-18 JIS YGW12 LR 3Y H15 (M21 & C1)
Approvals are based on factory location. Please contact ESAB for more information.
Typical Weld Metal Analysis %
Typical Weld Metal Analysis %
C
Mn
P
S
Si
CO2(C1)
0.07 %
1.5 %
0.013 %
0.010 %
0.9 %
Lincoln SuperArc® L-56® .030 MIG Welding Wire - 2 lb Spool (ED030631)
$10.27
Lincoln SuperArc® L-56® .030 MIG Welding Wire - 2 lb Spool (ED030631)
Features
High levels of manganese and silicon deoxidizers tolerate medium to heavy mill scale surfaces
Excellent toe-wetting provides optimal bead appearance
Copper coated for long contact tip life
Supports short-circuiting, globular, axial spray and pulsed spray transfer
Available to meet Buy America. Choose a Buy America MTS product from the list of Available Types or contact a Lincoln Electric representative
Lincoln SuperGlaze® 4043 3/64in- 1lb Spool
$10.07
Lincoln SuperGlaze® 4043 3/64in-1lb Spool ED030310
MIG (GMAW)
CLASSIFICATIONS:AWS A5.10 : ER4043
4043 Aluminum Silicon alloy is very commonly used for welding on 6XXX base materials and other heat treatable alloys. 4043 is a soft alloy, with good crack resistance and high penetration compared to other filler metals. It can be used for certain brazing applications and to weld on high silicon casts like A356. Welding of 5XXX with 4043 and other 4XXX filler metals should be avoided.
Features
Designed for welding heat-treatable base alloys and more specifically the 6XXX series alloys
Lower melting point and more fluidity than the 5XXX series filler alloys
Low sensitivity to weld cracking with the 6XXX series base alloys
Aluminum Welding Wire
Lincoln SuperGlaze® 5356 .035" Aluminum MIG Welding Wire (ED030312)
from $15.99
Lincoln SuperGlaze® 5356.035" Aluminum MIG Welding Wire - 1lb Spool (ED030312)
SuperGlaze 5356 is Aluminum Magnesium alloy very commonly used for higher strength welding of 5XXX and 6XXX base materials. It has higher columnar strength and uses less amperage for the same WFS as 4XXX filler metals.
Features
General purpose filler alloy for 5XXX and 6XXX series alloys
The most widely used welding alloy
High strength filler metal