Engine Driven Welders (50)

Lincoln Electric Ranger® 225 Engine Driven Welder (Kohler®) K2857-1 LIMITED-TIME OFFER (US Only)!Buy a Ranger® 225 Engine Driven Welder and receive a $700 VISA gift card rebate. STACK & SAVE - Up to $200.  ADD ACCESSORIES & FILLER METALS FOR MORE SAVINGS. Click on the link below for more details.  View other Buy Red Save Green RebatesRedeem Rebate  ARM YOURSELF WITH THE RIGHT WELDER The Ranger® 225 is a multi-process, engine-driven welder designed for a variety of processes - stick, TIG, MIG or flux cored. Whatever the process or application, arm yourself to get the job done and get it done right the first time. · Totally enclosed case protects the engine and limits noise· Smooth DC welding output· 10,500 Watts AC generator power Totally Enclosed Case· Engine is fully protected.· 3 service access doors.· Low noise - 76.4 dBA sound level at 23 ft. (7 m). 100.7 dB sound power (Lwa) at rated output.Versatile DC Welding· Smooth DC welding output for a broad range of stick electrode types.· MIG, flux-cored and TIG capable (with optional equipment).10,500 Watts Peak Single-Phase AC Generator Power· 9,000 watts continuous power for generator output, plasma cutter or inverter welder.· Power-up lights, grinder, and power tools.23 HP Kohler® Gasoline Engine· 2 cylinder, 4 cycle overhead valve air-cooled design.· Oil drain extension for easy oil changes.· 12 gallon tank for extended run times.· Only 1.5 gallons/hour at 210 amps DC, 25V, 100% duty cycle. Visual fuel level gauge on both sides of unit. Rugged Reliability· Welding and AC generator outputs rated at 104ºF (40ºC). Features Totally Enclosed Case Versatile DC Welding 10,500 Watts Peak Single-Phase AC Generator Power 23 HP Kohler® Gasoline Engine Rugged Reliability Standard welder/generator with great stick capabilities and AC generator output for the construction, farm, ranch, and maintenance welding applications.

Lincoln Electric Air Vantage® 566X (Deutz®) Ready-Pak® 3 K3242-3-RP3 The Air Vantage® 566X is a powerful multifunction machine that offers up to 600 amps of IEC rated welding output, 20 kW of auxiliary power, and 60 cfm of compressed air in a single package. This 3-in-1 workhorse has been designed to meet the most challenging job site needs and environments. The rugged Air Vantage 566X can handle a challenging assortment of tasks from heavy-duty carbon arc gouging to pulse welding. Now better than ever, the machine features CrossLinc® Technology to provide welders with greater control at the arc to help improve safety, productivity, and weld quality. Purchase this powerhouse today! Features On Demand Versatility – Offers up to 600 amps (IEC rated at 525 amps) of welding current to tackle numerous welding and carbon arc gouging applications. Select one of five basic process modes including CC-Stick, Downhill Pipe, DC Touch Start TIG®, CV-Wire, or Arc Gouging mode, which maximizes output for up to 3/8 in. (9.5 mm) carbon rods. Generator Output – Provides up to 20 kW of continuous three-phase power to run industrial tools such as plasma cutters, pumps, or inverter welders. Integrated Air Compressor – 60 cfm @ 100 psi of compressed air powered by VMAC® Patented Chopper® Technology– Experience premium arc performance with minimized spatter for stick or pipe welding as well as enhanced gouging performance that prevents the engine from stalling, resulting in smooth material removal. Expanded Welding Capabilities – Utilize customized modes for stainless, aluminum, and steel as well as advanced SAW and orbital pipe modes. Features pulse welding capability for better arc control in out-of-position work and low heat input for critical welds. CrossLinc® Enabled – Allows communication through a standard weld cable to enable voltage or current control at the arc without a control cable to help improve safety, quality, and productivity with less trips to the power source and reduced jobsite clutter. Built-in True Voltage Technology™ (TVT) compensates for voltage drop to further improve operations. Reliable Operations – Engineered tough and field proven for ruggedness and durability to meet the most challenging job site needs and harshest environments. Industrial Diesel Engine – Powered by a 65.7 hp, turbocharged Deutz® diesel engine. Runs smooth and quiet while meeting EPA Tier 4 Final compliance. Rent-Ready Package – Product comes in one preassembled package from the factory. Ready-Pak® 3 option includes the welder, trailer, fender and light kit, and cable rack. Excellent, all-around welder/generator with integrated 60 cfm air compressor. Capable of up to 600 amps of DC multi-process welding, 120/240 VAC single phase, and 240 VAC three phase auxiliary power. Powered by a 65.7 hp Deutz® TD2.9L4 diesel engine and features patented Chopper Technology® and CrossLinc® Technology. The Ready-Pak® 3 includes the welder, trailer, fender and light kit, and cable rack in one preassembled package.

Lincoln Electric Vantage® 549X (Deutz®) Ready-Pak® 2 K3534-2-RP2 The Vantage 549X is a powerful welder/generator that packs up to 575 amps of welding output and 19 kW of auxiliary power into a single machine. Housing a compliant 49.4 horsepower engine, the machine meets all state and federal emissions regulations to move freely across state lines without the burden of extra compliance fees. Coupled with a dependable design, the durable Vantage 549X can handle an extensive range of jobs such as heavy-duty carbon arc gouging, large submerged arc wires, and advanced pulse welding. Now better than ever, the machine features CrossLinc® Technology to provide welders with greater control at the arc to help improve safety, productivity, and weld quality. Choose this machine to handle your next job! Features Power Without Boundaries – Offers up to 575 amps (IEC rated at 525 amps) of welding current to tackle numerous welding and carbon arc gouging applications. Select one of five basic process modes including CC-Stick, Downhill Pipe, DC Touch Start TIG®, CV-Wire, or Arc Gouging mode, which maximizes output for up to 3/8 in. (9.5 mm) carbon rods. Generator Output – Provides up to 19 kW of continuous three-phase power to run industrial tools such as plasma cutters, pumps, or inverter welders. Patented Chopper® Technology – Experience premium arc performance with minimized spatter for stick or pipe welding as well as enhanced gouging performance that prevents the engine from stalling, resulting in smooth material removal. Expanded Welding Capabilities – Utilize customized modes for stainless, aluminum, and steel as well as advanced SAW and orbital pipe modes. Features pulse welding capability for better arc control in out-of-position work and low heat input for critical welds. CrossLinc® Enabled – Allows communication through a standard weld cable to enable voltage or current control at the arc without a control cable to help improve safety, quality, and productivity with less trips to the power source and reduced jobsite clutter. Built-in True Voltage Technology™ (TVT) compensates for voltage drop to further improve operations. Reliable Operations – Engineered tough and field proven for ruggedness and durability to meet the most challenging job site needs and harshest environments. Industrial Diesel Engine – Powered by a 49.4 hp, turbocharged Deutz® diesel engine. Runs smooth and quiet while meeting EPA Tier 4 Final compliance Rent-Ready Package – Product comes in one preassembled package from the factory. Ready-Pak® 2 option includes the welder and trailer. Excellent, all-around welder/generator capable of up to 575 amps of DC multi-process welding, 120/240 VAC single phase, and 240 VAC three phase auxiliary power. Powered by a 49.4 hp Deutz® TD2.9L4 diesel engine and features patented Chopper Technology® and CrossLinc® Technology. The Ready-Pak® 2 includes the welder and trailer in one preassembled package.

Lincoln Electric Vantage® 441X (Perkins®) K4535-1 The Vantage® 441X is the welder/generator you need when the job calls for more power to run heavier wires and larger arc gouge carbons to boost productivity. Powered by a turbocharged Perkins® engine, this machine offers up to 520 amps of welding output and 17 kW of auxiliary power to cover all your welding needs from heavy-duty carbon arc gouging to advanced pulse welding. The Vantage 441X delivers reliable operation and smooth arc characteristics when needed, including cold-weather and high altitude environments. Now better than ever, the machine features CrossLinc Technology to provide welders with greater control at the arc to help improve safety, productivity, and quality. Choose this machine to complete your next challenge! Features Enhanced Power and Performance – Offers up to 520 amps (IEC rated at 400 amps) of welding current to tackle numerous welding and carbon arc gouging applications. Select one of five basic process modes including CC-Stick, Downhill Pipe, DC Touch Start TIG®, CV-Wire, or Arc Gouging mode, which maximizes output for up to 3/8 in. (9.5 mm) carbon rods. Generator Output – Provides up to 17 kW of continuous three-phase power to run industrial tools such as plasma cutters, pumps, or inverter welders. Patented Chopper® Technology – Experience premium arc performance with minimized spatter for stick or pipe welding as well as enhanced gouging performance that prevents the engine from stalling, resulting in smooth material removal. Expanded Welding Capabilities – Utilize customized modes for stainless, aluminum, and steel as well as advanced SAW and orbital pipe modes. Features pulse welding capability for better arc control in out-of-position work and low heat input for critical welds. CrossLinc® Enabled – Allows communication through a standard weld cable to enable voltage or current control at the arc without a control cable to help improve safety, quality, and productivity with less trips to the power source and reduced jobsite clutter. Built-in True Voltage Technology™ (TVT) compensates for voltage drop to further improve operations. Reliable Operations – Engineered tough and field proven for ruggedness and durability to meet the most challenging job site needs and harshest environments. Industrial Diesel Engine – Powered by a 41.0 HP, turbocharged Perkins® diesel engine. Runs smooth and quiet with excellent cold-weather starting and high altitude operation while meeting EPA Tier 4 Final compliance. Excellent, all-around welder/generator capable of up to 520 amps of DC multi-process welding, 120/240 VAC single phase, and 240 VAC three phase auxiliary power. Powered by a 41.0 HP Perkins® 404F-E22T diesel engine and features patented Chopper Technology® and CrossLinc® Technology.

Lincoln Electric Vantage® 566X (Deutz®) K3239-3 The Vantage® 566X is a powerful welder/generator that offers up to 600 amps of welding output and 20 kW of auxiliary power. With dependability in mind, the machine has been designed and manufactured to conquer the toughest jobs. The resilient Vantage 566X can handle a wide array of tasks such as heavy-duty carbon arc gouging, large submerged arc wires, and advanced pulse welding. Now better than over, the machine features CrossLinc® Technology to provide welders with greater control at the arc to help improve safety, productivity, and quality. Select this machine to tackle your next task! Features Rugged and Reliable Powerhouse – Offers up to 600 amps (IEC rated at 525 amps) of welding current to tackle numerous welding and carbon arc gouging applications. Select one of five basic process modes including CC-Stick, Downhill Pipe, DC Touch Start TIG®, CV-Wire, or Arc Gouging mode, which maximizes output for up to 3/8 in. (9.5 mm) carbon rods. Generator Output – Provides up to 20 kW of continuous three-phase power to run industrial tools such as plasma cutters, pumps, or inverter welders. Patented Chopper® Technology – Experience premium arc performance with minimized spatter for stick or pipe welding as well as enhanced gouging performance that prevents the engine from stalling, resulting in smooth material removal. Expanded Welding Capabilities – Utilize customized modes for stainless, aluminum, and steel as well as advanced SAW and orbital pipe modes. Features pulse welding capability for better arc control in out-of-position work and low heat input for critical welds. CrossLinc® Enabled – Allows communication through a standard weld cable to enable voltage or current control at the arc without a control cable to help improve safety, quality, and productivity with less trips to the power source and reduced jobsite clutter. Built-in True Voltage Technology™ (TVT) compensates for voltage drop to further improve operations. Reliable Operations – Engineered tough and field proven for ruggedness and durability to meet the most challenging job site needs and harshest environments. Industrial Diesel Engine – Powered by a 65.7 hp, turbocharged Deutz® diesel engine. Runs smooth and quiet while meeting EPA Tier 4 Final compliance Excellent, all-around welder/generator capable of up to 600 amps of DC multi-process welding, 120/240 VAC single phase, and 240 VAC three phase auxiliary power. Powered by a 65.7 hp Deutz® TD2.9L4 diesel engine and features patented Chopper Technology® and CrossLinc® Technology.

Lincoln Electric Vantage® 566X (Deutz®) Ready-Pak® 1 K3239-3-RP1 The Vantage® 566X is a powerful welder/generator that offers up to 600 amps of welding output and 20 kW of auxiliary power. With dependability in mind, the machine has been designed and manufactured to conquer the toughest jobs. The resilient Vantage 566X can handle a wide array of tasks such as heavy-duty carbon arc gouging, large submerged arc wires, and advanced pulse welding. Now better than over, the machine features CrossLinc® Technology to provide welders with greater control at the arc to help improve safety, productivity, and quality. Select this machine to tackle your next task! Features Rugged and Reliable Powerhouse – Offers up to 600 amps (IEC rated at 525 amps) of welding current to tackle numerous welding and carbon arc gouging applications. Select one of five basic process modes including CC-Stick, Downhill Pipe, DC Touch Start TIG®, CV-Wire, or Arc Gouging mode, which maximizes output for up to 3/8 in. (9.5 mm) carbon rods. Generator Output – Provides up to 20 kW of continuous three-phase power to run industrial tools such as plasma cutters, pumps, or inverter welders. Patented Chopper® Technology – Experience premium arc performance with minimized spatter for stick or pipe welding as well as enhanced gouging performance that prevents the engine from stalling, resulting in smooth material removal. Expanded Welding Capabilities – Utilize customized modes for stainless, aluminum, and steel as well as advanced SAW and orbital pipe modes. Features pulse welding capability for better arc control in out-of-position work and low heat input for critical welds. CrossLinc® Enabled – Allows communication through a standard weld cable to enable voltage or current control at the arc without a control cable to help improve safety, quality, and productivity with less trips to the power source and reduced jobsite clutter. Built-in True Voltage Technology™ (TVT) compensates for voltage drop to further improve operations. Reliable Operations – Engineered tough and field proven for ruggedness and durability to meet the most challenging job site needs and harshest environments. Industrial Diesel Engine – Powered by a 65.7 hp, turbocharged Deutz® diesel engine. Runs smooth and quiet while meeting EPA Tier 4 Final compliance Rent-Ready Package – Product comes in one preassembled package from the factory. Ready-Pak® 1 option includes the welder, trailer, fender and light kit, cable rack, welding cables, ground clamps, and electrode holder. Excellent, all-around welder/generator capable of up to 600 amps of DC multi-process welding, 120/240 VAC single phase, and 240 VAC three phase auxiliary power. Powered by a 65.7 hp Deutz® TD2.9L4 diesel engine and features patented Chopper Technology® and CrossLinc® Technology. The Ready-Pak® 1 includes the welder, trailer, fender and light kit, cable rack, welding cables, ground clamps, and electrode holder in one preassembled package.

Lincoln Electric Vantage® 549X (Deutz®) K3534-2 The Vantage® 549X is a powerful welder/generator that packs up to 575 amps of welding output and 19 kW of auxiliary power into a single machine. Housing a compliant 49.4 horsepower engine, the machine meets all state and federal emissions regulations to move freely across state lines without the burden of extra compliance fees. Coupled with a dependable design, the durable Vantage 549X can handle an extensive range of jobs such as heavy-duty carbon arc gouging, large submerged arc wires, and advanced pulse welding. Now better than ever, the machine features CrossLinc® Technology to provide welders with greater control at the arc to help improve safety, productivity, and weld quality. Choose this machine to handle your next job! Features Power Without Boundaries – Offers up to 575 amps (IEC rated at 525 amps) of welding current to tackle numerous welding and carbon arc gouging applications. Select one of five basic process modes including CC-Stick, Downhill Pipe, DC Touch Start TIG®, CV-Wire, or Arc Gouging mode, which maximizes output for up to 3/8 in. (9.5 mm) carbon rods. Generator Output – Provides up to 19 kW of continuous three-phase power to run industrial tools such as plasma cutters, pumps, or inverter welders. Patented Chopper® Technology – Experience premium arc performance with minimized spatter for stick or pipe welding as well as enhanced gouging performance that prevents the engine from stalling, resulting in smooth material removal. Expanded Welding Capabilities – Utilize customized modes for stainless, aluminum, and steel as well as advanced SAW and orbital pipe modes. Features pulse welding capability for better arc control in out-of-position work and low heat input for critical welds. CrossLinc® Enabled – Allows communication through a standard weld cable to enable voltage or current control at the arc without a control cable to help improve safety, quality, and productivity with less trips to the power source and reduced jobsite clutter. Built-in True Voltage Technology™ (TVT) compensates for voltage drop to further improve operations. Reliable Operations – Engineered tough and field proven for ruggedness and durability to meet the most challenging job site needs and harshest environments. Industrial Diesel Engine – Powered by a 49.4 hp, turbocharged Deutz® diesel engine. Runs smooth and quiet while meeting EPA Tier 4 Final compliance. Excellent, all-around welder/generator capable of up to 575 amps of DC multi-process welding, 120/240 VAC single phase, and 240 VAC three phase auxiliary power. Powered by a 49.4 hp Deutz® TD2.9L4 diesel engine and features patented Chopper Technology® and CrossLinc® Technology.

Lincoln Electric Air Vantage® 566X Hydraulic (Deutz®) K4343-4 The Air Vantage® 566X Hydraulic is the ultimate utility machine. This versatile and powerful machine boasts a 575 amp welder, 20 kW generator, 60 cfm air compressor, and 14 gpm hydraulic pump to combine as a truly epic 4-in-1 workhorse. Suited for the most challenging job sites, the rugged Air Vantage 566X Hydraulic can handle a wide array of unique tasks from heavy-duty carbon arc gouging, powering industrial tools, or running a hydraulic crane. Now better than over, the machine features CrossLinc® Technology to provide welders with greater control at the arc to help improve safety, productivity, and quality. Select this multifunctional workhorse for your next job! Features The Ultimate Utility Machine – Offers up to 600 amps (IEC rated at 525 amps) of welding current to tackle numerous welding and carbon arc gouging applications. Select one of five basic process modes including CC-Stick, Downhill Pipe, DC Touch Start TIG®, CV-Wire, or Arc Gouging mode, which maximizes output for up to 3/8 in. (9.5 mm) carbon rods. Generator Output – Provides up to 20 kW of continuous three-phase power to run industrial tools such as plasma cutters, pumps, or inverter welders. Integrated Air Compressor with Built-In Rope Heater – 60 cfm @ 100 psi of compressed air powered by VMAC® Built-in Hydraulic Pump – 14 gpm @ 3000 psi Patented Chopper® Technology – Experience premium arc performance with minimized spatter for stick or pipe welding as well as enhanced gouging performance that prevents the engine from stalling, resulting in smooth material removal. Expanded Welding Capabilities – Utilize customized modes for stainless, aluminum, and steel as well as advanced SAW and orbital pipe modes. Features pulse welding capability for better arc control in out-of-position work and low heat input for critical welds. CrossLinc® Enabled – Allows communication through a standard weld cable to enable voltage or current control at the arc without a control cable to help improve safety, quality, and productivity with less trips to the power source and reduced jobsite clutter. Built-in True Voltage Technology™ (TVT) compensates for voltage drop to further improve operations. Reliable Operations – Engineered tough and field proven for ruggedness and durability to meet the most challenging job site needs and harshest environments. Industrial Diesel Engine – Powered by a 65.7 hp, turbocharged Deutz® diesel engine. Runs smooth and quiet while meeting EPA Tier 4 Final compliance. The Air Vantage® 566X Hydraulic is the ultimate utility machine. This versatile and powerful machine boasts a 575 amp welder, 20 kW generator, 60 cfm air compressor, and 14 gpm hydraulic pump to combine as a truly epic 4-in-1 workhorse. Suited for the most challenging job sites, the rugged Air Vantage 566X Hydraulic can handle a wide array of unique tasks from heavy-duty carbon arc gouging, powering industrial tools, or running a hydraulic crane. Now better than over, the machine features CrossLinc® Technology to provide welders with greater control at the arc to help improve safety, productivity, and quality. Select this multifunctional workhorse for your next job!

Lincoln Electric Vantage 566X Vantage® 566X (Deutz®) Ready-Pak® 3 K3239-3-RP3 The Vantage® 566X is a powerful welder/generator that offers up to 600 amps of welding output and 20 kW of auxiliary power. With dependability in mind, the machine has been designed and manufactured to conquer the toughest jobs. The resilient Vantage 566X can handle a wide array of tasks such as heavy-duty carbon arc gouging, large submerged arc wires, and advanced pulse welding. Now better than over, the machine features CrossLinc® Technology to provide welders with greater control at the arc to help improve safety, productivity, and quality. Select this machine to tackle your next task! Features Rugged and Reliable Powerhouse – Offers up to 600 amps (IEC rated at 525 amps) of welding current to tackle numerous welding and carbon arc gouging applications. Select one of five basic process modes including CC-Stick, Downhill Pipe, DC Touch Start TIG®, CV-Wire, or Arc Gouging mode, which maximizes output for up to 3/8 in. (9.5 mm) carbon rods. Generator Output – Provides up to 20 kW of continuous three-phase power to run industrial tools such as plasma cutters, pumps, or inverter welders. Patented Chopper® Technology – Experience premium arc performance with minimized spatter for stick or pipe welding as well as enhanced gouging performance that prevents the engine from stalling, resulting in smooth material removal. Expanded Welding Capabilities – Utilize customized modes for stainless, aluminum, and steel as well as advanced SAW and orbital pipe modes. Features pulse welding capability for better arc control in out-of-position work and low heat input for critical welds. CrossLinc® Enabled – Allows communication through a standard weld cable to enable voltage or current control at the arc without a control cable to help improve safety, quality, and productivity with less trips to the power source and reduced jobsite clutter. Built-in True Voltage Technology™ (TVT) compensates for voltage drop to further improve operations. Reliable Operations – Engineered tough and field proven for ruggedness and durability to meet the most challenging job site needs and harshest environments. Industrial Diesel Engine – Powered by a 65.7 hp, turbocharged Deutz® diesel engine. Runs smooth and quiet while meeting EPA Tier 4 Final compliance Rent-Ready Package – Product comes in one preassembled package from the factory. Ready-Pak® 3 option includes the welder, trailer, fender and light kit, and cable rack. Excellent, all-around welder/generator capable of up to 600 amps of DC multi-process welding, 120/240 VAC single phase, and 240 VAC three phase auxiliary power. Powered by a 65.7 hp Deutz® TD2.9L4 diesel engine and features patented Chopper Technology® and CrossLinc® Technology. The Ready-Pak® 3 includes the welder, trailer, fender and light kit, and cable rack in one preassembled package.

Lincoln Electric Vantage® 549X (Deutz®) Ready-Pak® 1 K3534-2-RP1 The Vantage® 549X is a powerful welder/generator that packs up to 575 amps of welding output and 19 kW of auxiliary power into a single machine. Housing a compliant 49.4 horsepower engine, the machine meets all state and federal emissions regulations to move freely across state lines without the burden of extra compliance fees. Coupled with a dependable design, the durable Vantage 549X can handle an extensive range of jobs such as heavy-duty carbon arc gouging, large submerged arc wires, and advanced pulse welding. Now better than ever, the machine features CrossLinc® Technology to provide welders with greater control at the arc to help improve safety, productivity, and weld quality. Choose this machine to handle your next job! Features Power Without Boundaries – Offers up to 575 amps (IEC rated at 525 amps) of welding current to tackle numerous welding and carbon arc gouging applications. Select one of five basic process modes including CC-Stick, Downhill Pipe, DC Touch Start TIG®, CV-Wire, or Arc Gouging mode, which maximizes output for up to 3/8 in. (9.5 mm) carbon rods. Generator Output – Provides up to 19 kW of continuous three-phase power to run industrial tools such as plasma cutters, pumps, or inverter welders. Patented Chopper® Technology – Experience premium arc performance with minimized spatter for stick or pipe welding as well as enhanced gouging performance that prevents the engine from stalling, resulting in smooth material removal. Expanded Welding Capabilities – Utilize customized modes for stainless, aluminum, and steel as well as advanced SAW and orbital pipe modes. Features pulse welding capability for better arc control in out-of-position work and low heat input for critical welds. CrossLinc® Enabled – Allows communication through a standard weld cable to enable voltage or current control at the arc without a control cable to help improve safety, quality, and productivity with less trips to the power source and reduced jobsite clutter. Built-in True Voltage Technology™ (TVT) compensates for voltage drop to further improve operations. Reliable Operations – Engineered tough and field proven for ruggedness and durability to meet the most challenging job site needs and harshest environments. Industrial Diesel Engine – Powered by a 49.4 hp, turbocharged Deutz® diesel engine. Runs smooth and quiet while meeting EPA Tier 4 Final compliance Rent-Ready Package – Product comes in one preassembled package from the factory. Ready-Pak® 1 option includes the welder, trailer, fender and light kit, cable rack, welding cables, ground clamps, and electrode holder. Excellent, all-around welder/generator capable of up to 575 amps of DC multi-process welding, 120/240 VAC single phase, and 240 VAC three phase auxiliary power. Powered by a 49.4 hp Deutz® TD2.9L4 diesel engine and features patented Chopper Technology® and CrossLinc® Technology. The Ready-Pak® 1 includes the welder, trailer, fender and light kit, cable rack, welding cables, ground clamps, and electrode holder in one preassembled package.

Lincoln Electric Vantage® 441X (Perkins®) Ready-Pak® 3 K4535-1-RP3 The Vantage® 441X is the welder/generator you need when the job calls for more power to run heavier wires and larger arc gouge carbons to boost productivity. Powered by a turbocharged Perkins® engine, this machine offers up to 520 amps of welding output and 17 kW of auxiliary power to cover all your welding needs from heavy-duty carbon arc gouging to advanced pulse welding. The Vantage 441X delivers reliable operation and smooth arc characteristics when needed, including cold-weather and high altitude environments. Now better than ever, the machine features CrossLinc Technology to provide welders with greater control at the arc to help improve safety, productivity, and quality. Choose this machine to complete your next challenge! Features Enhanced Power and Performance – Offers up to 520 amps (IEC rated at 400 amps) of welding current to tackle numerous welding and carbon arc gouging applications. Select one of five basic process modes including CC-Stick, Downhill Pipe, DC Touch Start TIG®, CV-Wire, or Arc Gouging mode, which maximizes output for up to 3/8 in. (9.5 mm) carbon rods. Generator Output – Provides up to 17 kW of continuous three-phase power to run industrial tools such as plasma cutters, pumps, or inverter welders. Patented Chopper® Technology – Experience premium arc performance with minimized spatter for stick or pipe welding as well as enhanced gouging performance that prevents the engine from stalling, resulting in smooth material removal. Expanded Welding Capabilities – Utilize customized modes for stainless, aluminum, and steel as well as advanced SAW and orbital pipe modes. Features pulse welding capability for better arc control in out-of-position work and low heat input for critical welds. CrossLinc® Enabled – Allows communication through a standard weld cable to enable voltage or current control at the arc without a control cable to help improve safety, quality, and productivity with less trips to the power source and reduced jobsite clutter. Built-in True Voltage Technology™ (TVT) compensates for voltage drop to further improve operations. Reliable Operations – Engineered tough and field proven for ruggedness and durability to meet the most challenging job site needs and harshest environments. Industrial Diesel Engine – Powered by a 41.0 hp, turbocharged Perkins® diesel engine. Runs smooth and quiet with excellent cold-weather starting and high altitude operation while meeting EPA Tier 4 Final compliance. Rent-Ready Package – Product comes in one preassembled package from the factory. Ready-Pak® 3 option includes the welder, trailer, fender and light kit, and cable rack Excellent, all-around welder/generator capable of up to 520 amps of DC multi-process welding, 120/240 VAC single phase, and 240 VAC three phase auxiliary power. Powered by a 41.0 hp Perkins® 404F-E22T diesel engine and features patented Chopper Technology® and CrossLinc® Technology. The Ready-Pak® 3 includes the welder, trailer, fender and light kit, and cable rack in one preassembled package.

Lincoln Electric Vantage® 322 (Kubota®) Ready-Pak® 2 K2409-5-RP2 The Vantage® 322 is a versatile welder/generator offering up to 400 amps of welding output and 11 kW of auxiliary power. Featuring a compact design and multi-process welding capabilities, the machine allows operators to handle a wide range of tasks from stick or wire welding to powering jobsite tools. Designed with dependability in mind, the Vantage 322 has field-proven toughness to maintain uptime. The Vantage 322 provides excellent value, which makes the ideal choice for construction teams, pipe rig owners, and rental fleet managers. Features Compact Versatility – Offers up to 400 amps (IEC rated at 300 amps) of welding current to tackle numerous welding and carbon arc gouging applications. Select one of five basic process modes including CC-Stick, Downhill Pipe, DC Touch Start TIG®, CV-Wire, or Arc Gouging mode, which maximizes output for up to 5/16 in. (8.0 mm) carbon rods. Generator Output – Provides up to 11 kW of continuous three-phase power to run industrial tools such as plasma cutters, pumps, or inverter welders. Patented Chopper® Technology – Experience premium arc performance with minimized spatter for stick or pipe welding as well as enhanced gouging performance that prevents the engine from stalling, resulting in smooth material removal. Reliable Operations – Engineered tough and field proven for ruggedness and durability to meet the most challenging job site needs and harshest environments. Industrial Diesel Engine – Powered by a 22 HP naturally aspirated Kubota® diesel engine. Runs smooth and quiet while meeting EPA Tier 4 Final compliance. Innovative Service Access – Lockable and removable sliding access door to service the engine and internal components, battery drawer on front of machine for quick access, and top-mounted radiator cover provide convenient access to the machine. Run Longer Between Fill Ups – Features a large 20 US gal. (75.7 L) fuel tank compared to smaller 11 US gal. (41.6 L) tanks in competitive machines Rent-Ready Package – Product comes in one preassembled package from the factory. Ready-Pak® 2 option includes the welder and trailer. Excellent, all-around welder/generator capable of up to 400 amps of DC multi-process welding, 120/240 VAC single phase, and 240 VAC three phase auxiliary power. Powered by a 22 HP Kubota® V1505 diesel engine and features patented Chopper Technology®. The Ready-Pak® 2 includes the welder and trailer in one preassembled package.

Lincoln Electric Vantage® 322 (Kubota®) Ready-Pak® 3 K2409-5-RP3 The Vantage® 322 is a versatile welder/generator offering up to 400 amps of welding output and 11 kW of auxiliary power. Featuring a compact design and multi-process welding capabilities, the machine allows operators to handle a wide range of tasks from stick or wire welding to powering jobsite tools. Designed with dependability in mind, the Vantage 322 has field-proven toughness to maintain uptime. The Vantage 322 provides excellent value, which makes the ideal choice for construction teams, pipe rig owners, and rental fleet managers. Features Compact Versatility – Offers up to 400 amps (IEC rated at 300 amps) of welding current to tackle numerous welding and carbon arc gouging applications. Select one of five basic process modes including CC-Stick, Downhill Pipe, DC Touch Start TIG®, CV-Wire, or Arc Gouging mode, which maximizes output for up to 5/16 in. (8.0 mm) carbon rods. Generator Output – Provides up to 11 kW of continuous three-phase power to run industrial tools such as plasma cutters, pumps, or inverter welders. Patented Chopper® Technology – Experience premium arc performance with minimized spatter for stick or pipe welding as well as enhanced gouging performance that prevents the engine from stalling, resulting in smooth material removal. Reliable Operations – Engineered tough and field proven for ruggedness and durability to meet the most challenging job site needs and harshest environments. Industrial Diesel Engine – Powered by a 22 HP, naturally aspirated Kubota® diesel engine. Runs smooth and quiet while meeting EPA Tier 4 Final compliance. Innovative Service Access – Lockable and removable sliding access door to service the engine and internal components, battery drawer on front of machine for quick access, and top-mounted radiator cover provide convenient access to the machine. Run Longer Between Fill Ups – Features a large 20 US gal. (75.7 L) fuel tank compared to smaller 11 US gal. (41.6 L) tanks in competitive machines Rent-Ready Package – Product comes in one preassembled package from the factory. Ready-Pak® 3 option includes the welder, trailer, fender and light kit, and cable rack. Excellent, all-around welder/generator capable of up to 400 amps of DC multi-process welding, 120/240 VAC single phase, and 240 VAC three phase auxiliary power. Powered by a 22 HP Kubota® V1505 diesel engine and features patented Chopper Technology®. The Ready-Pak® 3 includes the welder, trailer, fender and light kit, and cable rack in one preassembled package.

Lincoln Electric Ranger® 305 G EFI Engine Driven Welder (Kohler®) K3928-1 A WELDER FOR ALL SEASONS Make the Ranger 305 G your portable welding station - general stick and downhill pipe, Touch Start™ TIG, MIG, and flux-cored wire capability. Choose the Ranger 305 G EFI (electronic fuel injection) for easier starts in cold weather and lower fuel consumption, with no choke starting required. The 9,500 watt continuous single-phase AC generator powers motors starting, tools and inverter welders for extended range and process capability. Digital weld meters monitor actual welding output 12-gallon fuel capacity allows for extended operation Electric fuel pump helps avoid vapor lock during high-altitude operation Kohler® Gasoline Engine · 25 HP EFI (Electronic Fuel Injection) for easier starts in cold weather and lower fuel use! · Electric fuel pump to avoid vapor lock at high altitude operation. Multi-Process Welding · Excellent DC multi-process welding for general purpose stick, downhill pipe (stick), TIG, cored-wire and MIG (CO2 and mixed gas). · Only compact gasoline welder in North America rated at 29V for 300 amps of stick or CV welding. · CV wire welding with up to 5/64 in. (2.0 mm) diameter electrodes. Digital Weld Meters · Digital weld meters for amps and volts makes it easy to precisely pre-set your procedures and monitor actual welding output. Superior Arc Performance · Lincoln Electric Chopper Technology® - provides easy starts, a smooth arc, low spatter and optimal bead appearance. Peak Single-Phase AC Generator Power for Motor Starting · 12,000 watts peak · 9,500 watts continuous for high capacity needs such as a back-up generator, powering a Lincoln Electric Invertec® inverter welder. Also use for lights, a grinder or other power tools. · AC generator voltage is constant at 120V or 240V at any weld dial setting. Rugged Reliability · Welding and AC Generator Outputs rated at 104ºF (40ºC). Features Kohler® Gasoline Engine - 25 HP EFI (Electronic Fuel Injection) for easier starts in cold weather and lower fuel use! Multi-Process Welding - Excellent DC multi-process welding for general purpose stick, downhill pipe (stick), TIG, cored-wire, MIG (CO2 and mixed gas) and arc gouging. Digital Weld Meters - makes it easy to precisely pre-set Your procedures and monitor actual welding output. Superior Arc Performance - Lincoln Chopper Technology® provides easy starts, a smooth arc, low spatter and excellent bead appearance.

Lincoln Electric Vantage® 322 (Kubota®) Ready-Pak® 1 K2409-5-RP1 The Vantage® 322 is a versatile welder/generator offering up to 400 amps of welding output and 11 kW of auxiliary power. Featuring a compact design and multi-process welding capabilities, the machine allows operators to handle a wide range of tasks from stick or wire welding to powering jobsite tools. Designed with dependability in mind, the Vantage 322 has field-proven toughness to maintain uptime. The Vantage 322 provides excellent value, which makes the ideal choice for construction teams, pipe rig owners, and rental fleet managers. Purchase one of these machines today! Features Compact Versatility – Offers up to 400 amps (IEC rated at 300 amps) of welding current to tackle numerous welding and carbon arc gouging applications. Select one of five basic process modes including CC-Stick, Downhill Pipe, DC Touch Start TIG®, CV-Wire, or Arc Gouging mode, which maximizes output for up to 5/16 in. (8.0 mm) carbon rods. Generator Output – Provides up to 11 kW of continuous three-phase power to run industrial tools such as plasma cutters, pumps, or inverter welders. Patented Chopper® Technology – Experience premium arc performance with minimized spatter for stick or pipe welding as well as enhanced gouging performance that prevents the engine from stalling, resulting in smooth material removal. Reliable Operations – Engineered tough and field proven for ruggedness and durability to meet the most challenging job site needs and harshest environments. Industrial Diesel Engine – Powered by a 22 hp, naturally aspirated Kubota® diesel engine. Runs smooth and quiet while meeting EPA Tier 4 Final compliance. Innovative Service Access – Lockable and removable sliding access door to service the engine and internal components, battery drawer on front of machine for quick access, and top-mounted radiator cover provide convenient access to the machine. Run Longer Between Fill Ups – Features a large 20 US gal. (75.7 L) fuel tank compared to smaller 11 US gal. (41.6 L) tanks in competitive machines Rent-Ready Package – Product comes in one preassembled package from the factory. Ready-Pak® 1 option includes the welder, trailer, fender and light kit, cable rack, welding cables, ground clamps, and electrode holder. Excellent, all-around welder/generator capable of up to 400 amps of DC multi-process welding, 120/240 VAC single phase, and 240 VAC three phase auxiliary power. Powered by a 22 hp Kubota® V1505 diesel engine and features patented Chopper Technology®. The Ready-Pak® 1 includes the welder, trailer, fender and light kit, cable rack, welding cables, ground clamps, and electrode holder in one preassembled package.