Weldcote (332)

Weldcote 4043 (commonly referred to as AlSi5) is a 5% silicon aluminum filler metal that is available in Spools or cut lengths for MIG or TIG welding processes. 4043 aluminum filler metal is recommended for welding 3003, 3004, 5052, 6061, 6063 and casting alloys 43, 355, 356 and 214. The melting range is 1065-1170?F with a density of .097 lbs./cu.in. The average tensile strength is 27,000 psi, average yield strength of 18,000 psi and the post anodizing color is gray. 4043 aluminum filler metal is one of the oldest and most widely used welding and brazing alloys. The silicon additions result in improved fluidity (wetting action) to make the alloy a preferred choice by welders.

A-PRIME is designed with heavy duty vulcanized fibre backing for extended disc life. This provides a dramatic reduction in product curling. A-PRIME Top Size grinding aid built on top of Aluminum oxide grain for cooler cutting and longer life. Reduces clogging and burning.

A-PRIME is designed with heavy duty vulcanized fibre backing for extended disc life. This provides a dramatic reduction in product curling. A-PRIME Top Size grinding aid built on top of Aluminum oxide grain for cooler cutting and longer life. Reduces clogging and burning.

Z-PRIME is designed with heavy duty vulcanized fibre backing for extended disc life. This provides a dramatic reduction in product curling. Z-PRIME is designed with self-sharpening effect that constantly produces new sharp edges and thus enables a much better grinding performance.

Description Weldcote Metals 5356 (commonly referred to as AlMgS) is a 5% magnesium aluminum filler metal that is available for MIG or TIG Welding processes. Thedeposit of Weldcote Metals 5356 offers much better corrosion resistance when exposed to salt water. Common applications would be base metals 5050, 5052, 5083. 5356, 545,1 and 5456.

LDescription5356 aluminum MIG welding alloy is an all-position, non-heat treatable MIG wire used to weld the 5XXX series alloys when 40,000 psi tensile strength is not a requirement. Alloy 5356 is a very good all-purpose wire. It is the most widely used of all aluminum filler metals. Common applications are welding of boats/ships, bicycles, trucks, pressure vessels and automotive parts. Features 5356 aluminum/silicon GMAW (MIG) welding alloy Designed for welding heat treatable base alloys, specifically 6XXX series alloys Lower melting point and more fluidity than 5XXX series filler alloys Low sensitivity to weld cracking with 6XXX series base alloys Suitable for sustained elevated temperature service, i.e. above 150°F (65°C) All position, except vertical down welding Gray (post anodized) color Specifications Liquidus 1175°F (635°C) (as welded 5086 base plate) Solidus 1060°F (571°C) (as welded 5086 base plate) Tensile Strength 39,000 psi (as welded 5086 base plate) Yield Strength 19,000 psi (as welded 5086 base plate) Density 0.096 lbs./cu.in. (as welded 5086 base plate) Elongation in 2" 17% (as welded 5086 base plate) Applications Automotive bumpers and supports Structural frames in the shipbuilding industry Formed truck panels Railing Industry Power Industry Trailer Manufacturing Caution All parameters are suggested as basic guidelines and will vary depending on joint design, number of passes and other factors.

LDescription5356 aluminum MIG welding alloy is an all-position, non-heat treatable MIG wire used to weld the 5XXX series alloys when 40,000 psi tensile strength is not a requirement. Alloy 5356 is a very good all-purpose wire. It is the most widely used of all aluminum filler metals. Common applications are welding of boats/ships, bicycles, trucks, pressure vessels and automotive parts. Features 5356 aluminum/silicon GMAW (MIG) welding alloy Designed for welding heat treatable base alloys, specifically 6XXX series alloys Lower melting point and more fluidity than 5XXX series filler alloys Low sensitivity to weld cracking with 6XXX series base alloys Suitable for sustained elevated temperature service, i.e. above 150°F (65°C) All position, except vertical down welding Gray (post anodized) color Specifications Liquidus 1175°F (635°C) (as welded 5086 base plate) Solidus 1060°F (571°C) (as welded 5086 base plate) Tensile Strength 39,000 psi (as welded 5086 base plate) Yield Strength 19,000 psi (as welded 5086 base plate) Density 0.096 lbs./cu.in. (as welded 5086 base plate) Elongation in 2" 17% (as welded 5086 base plate) Applications Automotive bumpers and supports Structural frames in the shipbuilding industry Formed truck panels Railing Industry Power Industry Trailer Manufacturing Caution All parameters are suggested as basic guidelines and will vary depending on joint design, number of passes and other factors.

LDescription5356 aluminum MIG welding alloy is an all-position, non-heat treatable MIG wire used to weld the 5XXX series alloys when 40,000 psi tensile strength is not a requirement. Alloy 5356 is a very good all-purpose wire. It is the most widely used of all aluminum filler metals. Common applications are welding of boats/ships, bicycles, trucks, pressure vessels and automotive parts. Features 5356 aluminum/silicon GMAW (MIG) welding alloy Designed for welding heat treatable base alloys, specifically 6XXX series alloys Lower melting point and more fluidity than 5XXX series filler alloys Low sensitivity to weld cracking with 6XXX series base alloys Suitable for sustained elevated temperature service, i.e. above 150°F (65°C) All position, except vertical down welding Gray (post anodized) color Specifications Liquidus 1175°F (635°C) (as welded 5086 base plate) Solidus 1060°F (571°C) (as welded 5086 base plate) Tensile Strength 39,000 psi (as welded 5086 base plate) Yield Strength 19,000 psi (as welded 5086 base plate) Density 0.096 lbs./cu.in. (as welded 5086 base plate) Elongation in 2" 17% (as welded 5086 base plate) Applications Automotive bumpers and supports Structural frames in the shipbuilding industry Formed truck panels Railing Industry Power Industry Trailer Manufacturing Caution All parameters are suggested as basic guidelines and will vary depending on joint design, number of passes and other factors.

6010 Welding Stick Electrode 10 Pound Package Weldcote

6010 Weldcote Stick Welding Electrode 1/8 x 5 Pound

6010 Weldcote Stick Welding Electrode 3/32 x 5 Pound

6010 Weldcote Stick Welding Electrode 5/32 x 5 Pound

DESCRIPTION: 6013 is a high titanic coated electrode. This electrode was primarily designed to provide good wetting and shallow penetration for thin sheet metal applications (using smaller diameter electrodes), but with sufficient penetration for welding medium gauge steel. As a result, 6013 is an allpurpose electrode that provides a soft steady arc which is easily regenerated, easy slag control for vertical-down welding, low spatter and a beautiful bead appearance. 6013 electrodes may be used in any position with AC or DC (straight or reverse polarity). APPROVALS: Meets AWS A5.1 Class E6013. APPLICATIONS: 6013 electrode is commonly used for automobile bodies, truck frames and bodies, ornamental iron, metal furniture, farm implementations, machinery guards, storage tanks, or wherever appearance is important or desirable. CHEMICAL COMPOSITION MECHANICAL PROPERTIES Carbon .08 Tensile Strength Manganese .45 68,200 PSI 470 MPA Silicon .18 Phosphorus .012 Yield Strength Sulfur .009 59,500 PSI 410 MPA Elongation 28% Sizes and recommended current range (DC<+>) Diameter (mm) 2.6 3.2 4.0 5.0 Length (mm) 350 350 450 450 Amps (F) 60-90 100-120 110-160 160-220 (V&OH) 50-80 80-110 100-150 140-200 Description: • Weldcote Metals E6013 is a high titanic coated electrode. • This electrode was primarily designed to provide good wetting and shallow penetration for thin sheet metal applications (using smaller diameter electrodes), but with sufficient penetration for welding medium gauge steel. • As a result, 6013 electrodes may be used in any position with AC or DC (straight or reverse polarity). Applications: Applications are automobile and truck bodies, automotive frames, ornamental iron, metal furniture, farm implementations, machinery guards, storage tanks or wherever appearance is important or desirable. Procedure: Use a light whipping or weaving motion staying ahead of the puddle. Please note that procedures may vary with a change in position, base metals, filler metals, equipment and other changes.