CGW Dynabrade
Abrasives
Dynabrade Belt 1/2
Dynabrade Belt 1/2"x24" 80 Grit Ceramic Scalloped Edge Belt $4.02
Dynabrade 1/2" (13 mm) W x 24" (305 mm) L 80 Grit Ceramic DynaCut Scalloped Edge BeltDynabrade 1/2" (13 mm) W x 24" (305 mm) L 80 Grit Ceramic DynaCut Scalloped Edge BeltDynaCut Ceramic and Premium Ceramic Belts self-sharpening design lasts 50% to 200% longer than other abrasive sanding belts. Use for coatings removal on stainless steel carbon steel titanium nickel alloy chrome and inconel.WHY USE A SCALLOPED EDGE BELT?Scalloped edge belts blend right angle welds with less undercutting. Seen here the scalloped belt edges conform to the contact wheel of a Dynafile® III (Model 15420) providing consistent coverage as a weld is removed and blended.
Dynabrade Belt 1/2
Dynabrade Belt 1/2"x24" 60 Grit Ceramic Scalloped Edge Belt $4.02
Dynabrade 1/2" (13 mm) W x 24" (305 mm) L 60 Grit Ceramic DynaCut Scalloped Edge BeltDynabrade 1/2" (13 mm) W x 24" (305 mm) L 60 Grit Ceramic DynaCut Scalloped Edge BeltDynaCut Ceramic and Premium Ceramic Belts self-sharpening design lasts 50% to 200% longer than other abrasive sanding belts. Use for coatings removal on stainless steel carbon steel titanium nickel alloy chrome and inconel.WHY USE A SCALLOPED EDGE BELT?Scalloped edge belts blend right angle welds with less undercutting. Seen here the scalloped belt edges conform to the contact wheel of a Dynafile® III (Model 15420) providing consistent coverage as a weld is removed and blended.
Dynabrade Belt 1/2
Dynabrade Belt 1/2"x24" 120 Grit Ceramic Scalloped Edge Belt $4.02
Dynabrade 1/2" (13 mm) W x 24" (305 mm) L 120 Grit Ceramic DynaCut Scalloped Edge BeltDynabrade 1/2" (13 mm) W x 24" (305 mm) L 120 Grit Ceramic DynaCut Scalloped Edge BeltDynaCut Ceramic and Premium Ceramic Belts self-sharpening design lasts 50% to 200% longer than other abrasive sanding belts. Use for coatings removal on stainless steel carbon steel titanium nickel alloy chrome and inconel.WHY USE A SCALLOPED EDGE BELT?Scalloped edge belts blend right angle welds with less undercutting. Seen here the scalloped belt edges conform to the contact wheel of a Dynafile® III (Model 15420) providing consistent coverage as a weld is removed and blended.
CGW Dynafile Belts-1/4
CGW Dynafile Belts-1/4"x24 Zirconia 80 Grit 10 Pack Bag $11.20
More durable than aluminum oxide, zirconia-alumina is best for medium- to heavy-material removal. The material grains constantly fracture to produce new sharp edges. Commonly used on carbon steels, aerospace alloys, nickel alloys, aluminum, cast iron, forgings, and some stainless steels.
CGW Dynafile Belts-1/4
CGW Dynafile Belts-1/4"x24 Zirconia 60 Grit 10 Pack Bag $11.20
More durable than aluminum oxide, zirconia-alumina is best for medium- to heavy-material removal. The material grains constantly fracture to produce new sharp edges. Commonly used on carbon steels, aerospace alloys, nickel alloys, aluminum, cast iron, forgings, and some stainless steels.
CGW Dynafile Belts-1/4
CGW Dynafile Belts-1/4"x24 Zirconia 40 Grit 10 Pack Bag $11.60
More durable than aluminum oxide, zirconia-alumina is best for medium- to heavy-material removal. The material grains constantly fracture to produce new sharp edges. Commonly used on carbon steels, aerospace alloys, nickel alloys, aluminum, cast iron, forgings, and some stainless steels.
CGW Dynafile Belts-1/4
CGW Dynafile Belts-1/4"x24 Zirconia 50 Grit 10 Pack Bag $11.60
More durable than aluminum oxide, zirconia-alumina is best for medium- to heavy-material removal. The material grains constantly fracture to produce new sharp edges. Commonly used on carbon steels, aerospace alloys, nickel alloys, aluminum, cast iron, forgings, and some stainless steels.
CGW Dynafile Belts-1/4
CGW Dynafile Belts-1/4"x24 Zirconia 36 Grit 10 Pack Bag $12.00
More durable than aluminum oxide, zirconia-alumina is best for medium- to heavy-material removal. The material grains constantly fracture to produce new sharp edges. Commonly used on carbon steels, aerospace alloys, nickel alloys, aluminum, cast iron, forgings, and some stainless steels.
CGW Dynafile Belts-1/4
CGW Dynafile Belts-1/4"x24 Aluminum Oxide . 80 Grit 10 Pack Bag $8.00
Aluminum oxide is the most commonly used abrasive. Best-suited for general purpose deburring and blending, it is tough, economical and fracture-resistant. Commonly used on ferrous alloys, high-tensile materials and wood. Non-woven abrasives reduce the undercutting and gouging of surfaces. They are frequently used in deburring, surface preparation and as a final finishing step.
CGW Dynafile Belts-1/4
CGW Dynafile Belts-1/4"x24 Aluminum Oxide . 60 Grit 10 Pack Bag $8.00
Aluminum oxide is the most commonly used abrasive. Best-suited for general purpose deburring and blending, it is tough, economical and fracture-resistant. Commonly used on ferrous alloys, high-tensile materials and wood. Non-woven abrasives reduce the undercutting and gouging of surfaces. They are frequently used in deburring, surface preparation and as a final finishing step.
CGW Dynafile Belts-1/4
CGW Dynafile Belts-1/4"x24 Aluminum Oxide . 50 Grit 10 Pack Bag $8.20
Aluminum oxide is the most commonly used abrasive. Best-suited for general purpose deburring and blending, it is tough, economical and fracture-resistant. Commonly used on ferrous alloys, high-tensile materials and wood. Non-woven abrasives reduce the undercutting and gouging of surfaces. They are frequently used in deburring, surface preparation and as a final finishing step.
CGW Dynafile Belts-1/4
CGW Dynafile Belts-1/4"x24 Aluminum Oxide . 40 Grit 10 Pack Bag $8.20
Aluminum oxide is the most commonly used abrasive. Best-suited for general purpose deburring and blending, it is tough, economical and fracture-resistant. Commonly used on ferrous alloys, high-tensile materials and wood. Non-woven abrasives reduce the undercutting and gouging of surfaces. They are frequently used in deburring, surface preparation and as a final finishing step.
CGW Dynafile Belts-1/4
CGW Dynafile Belts-1/4"x24 Aluminum Oxide . 120 Grit 10 Pack Bag $7.80
Aluminum oxide is the most commonly used abrasive. Best-suited for general purpose deburring and blending, it is tough, economical and fracture-resistant. Commonly used on ferrous alloys, high-tensile materials and wood. Non-woven abrasives reduce the undercutting and gouging of surfaces. They are frequently used in deburring, surface preparation and as a final finishing step.

Check Out Badassreels 8 Slot Black Reels!

Bad Ass Welding Products

Family Owned Small Business

Can't find it?

Contact us and we'll get it!