Everlast REDSABRE 2000 Laser Welder w/Wire Feeder EV-LRS2000

Everlast REDSABRE 2000 Laser Welder EV-LRS2000

The Everlast REDSABRE 2000 is a 2,000 watt, air-cooled portable fiber laser welder that comes complete with a wire feeder and SUPT21T handheld laser welding gun. The REDSABRE 2000 features a Class 4 laser that operates at the 1080 nm wave length. It has a maximum weld capaicty on mild and stainless steels of 1/4" thickness. For aluminum, it can perform fusion welds up to 7/32" thick. The REDSABRE 2000 also has both clean and cut functions, making it the perfect auto body machine.

When coupled with the INCLUDED Synchronizing Wire Feeder attachment, the REDSABRE can perform synchronous welds using wire, where autogenous welds are not recommended. The large high definition LCD screens on both the welder and feeder feature a sharp, high contrast layout of functions and parameters. The system comes complete with laser welder with 30 ft. laser gun, wire feeder, consumables kit for welding, cutting and cleaning, spare protective lens kit, spare focus lens, data cable, safety goggles and lock-out key. The REDSABRE 2000 has an industry best five year factory warranty.

Process

• Laser welding (1080 nm)
• Laser cutting
• Laser cleaning

Applications
Aerospace
Automotive
Agricultural
HVAC
Manufacturing
Marine
Motor Sports
Precious Metals

Features

• Innovative and efficient multi-fan air-cooled technology
  greatly reduces the size and weight compared to same wattage water-cooled laser models.
• Synchronous Wire-Feeder attachment
  Is included to safely feed wire for better fusing options when autogenous welds are not advisable.
• Portable Pendant Touch Screen
  Eliminates control panels with knobs and buttons. Wire feed features similar touch screen programming.
  Easy-to-use functions
  Reduce learning time for inexperienced users.
• Low heat input is un-rivaled
  Keeping warping and heat issues in check.
• Leaves surrounding metal area cool-to-the-touch.
• Fiber Laser technology
  Makes the RedSaber a complete welding system, allowing it to weld, cut and clean with different nozzles and lenses.
• Safety Interlock
  Prevents Laser activation without direct metal contact. E-Stop switch and key switch adds extra level of safety.
• Gun features “On” light
  To indicate the laser has been triggered and is on. The light is visible by the operator at all times while welding.
• Low-power visible Red laser
  Is used for an accurate pilot-guide for the 1080 nm “invisible” wave length of the Class 4 main laser.
• Clean welds and remove rust
  With 3 cleaning functions and lenses.
• Light gauge sheet cutting
  Can be performed with optional lens.
  
  
  
  
  Comes Complete With
• REDSABRE 2000 Laser Welder
• Synchronizing Wire feeder attachment
• Ergonomic Laser Gun with 30 ft. cable
• Starter Consuambles Kit with nozzles for welding, cleaning and cutting
  
• Spare D18T2 Protective Lens Kit: 5 pc
• Spare D20T4.5 F800 Focus Lens
• Data Cable
• Safety Goggles
• Key

• The operation of all Lasers in the USA falls under FDA restrictions, guidelines and general regulations. Additional OSHA and ANSI regulations and standards applicable to laser welding/cleaning/cutting use and applications exist.
• This is a class 4 laser, the most dangerous category. Safety Training and special laser light shielding equipment is required to use lasers for any application. Laser light radiation can be harmful, even though the wave length is not visible to the naked eye.
• Use safety glasses only matched to the wave length of this unit. Other Specialized safety equipment is also required> Do not use standard cutting shades or welding helmets while using this equipment. Use only safety eye and face wear rated for 1080 nm wave lengths.
• The purchase of this laser welder may require registration with your local and state governments. Please identify any registration issues and concerns before purchase. Please contact your local and state governing authorities before purchase to inquire about registering your laser welders. Everlast does not maintain a list for each state, nor lists of general requirements for registration.
• The use of a laser in your business may require you to follow additional ANSI guidelines separate from the use of regular arc welders. It may also require special training and certifications that require additional investment and costs. In businesses with employees, you may be required to appoint a Laser Safety Officer with completed training and certification and additionally train individual operators and nearby individuals in laser safety and use.
• Contact independent laser safety certification companies for details and pricing of training. Most companies offer online certification, with some offering in person training as well. Prices vary for certification.
• Check with your insurance company to make sure that the use of a laser welder in your facility is covered if training and certifications are in place.