Wheel edge can be dressed for effective deburring, finishing and polishing of all metal alloys and many plastics and composites
Tough, layered, unitized construction can operate clockwise or counterclockwise directions
Densities and grades ranging from soft and conformable to hard and aggressive offer utility for a wide variety of applications
Scotch-Brite™ EX2 Deburring Wheel is a convolute-constructed wheel that provides mid-range aggressiveness and hardness for deburring, edge radius, blending, polishing, and finishing. This deburring wheel performs best when consistently presented with a sharp edge or metal burrs.
A convolute-constructed wheel offering mid-range aggressiveness and hardness for deburring, edge radius, blending, polishing and finishing
Our high performance combination of mineral (aggressiveness) and density (hardness) make the Scotch-Brite™ EX2 wheel uniquely suited to applications where a moderate degree of conformability, wheel hardness, and edge retention are needed. A unique resin system helps minimize smearing and reduces heat build-up. The EX2 Deburring Wheel runs cool and resists loading due to its open-web construction. We did this to reduce the risk of part discoloration and warping, while extending the life of the wheel. The EX2 Deburring Wheel is available in fine and medium grade abrasives.
Available in Two Mineral TypesOur Scotch-Brite™ EX2 Deburring Wheel is available with silicon carbide or aluminum oxide abrasive mineral. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep and finishing. Aluminum oxide is a hard, blocky mineral that provides high cut-rate and long life. While silicon carbide breaks down faster than aluminum oxide, it produces a finer finish.
The Many Benefits of Open Web Abrasives
Scotch-Brite™ industrial abrasives are unique surface conditioning products with abrasives incorporated into non-woven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. We chose an open-web material that runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.
|
Abrasive Material
|
Aluminum Oxide
|
|
Application
|
Deburring, Finishing, Polishing
|
|
Attachment Type
|
Center Hole
|
|
Brands
|
Scotch-Brite™
|
|
Center Hole Diameter (Imperial)
|
1 in
|
|
Center Hole Diameter (Metric)
|
25.4 mm
|
|
Density
|
8
|
|
Equipment - Machines
|
Inline Sanders, Manual Backstand
|
|
Face Width (Imperial)
|
1 in
|
|
Face Width (Metric)
|
25.4 mm
|
|
For Use On
|
Composites,Glass
|
|
Grade
|
Medium
|
|
Industries
|
Marine, Metalworking
|
|
Maximum Speed
|
6000 rpm
|
|
Product Color
|
Gray
|
|
Product Form
|
Wheel
|
|
Sub Applications
|
Blending, Flat Finishing
|
|
Sub Industries
|
Builders Hardware, Medical Instruments, Metal Fabrication, Metal Implants, Plumbing Fixtures, Turbine Engines
|
